Payment & Shipping Terms:
|Max. Passageheight:||3000mm||Max. Opeing Speed:||0.7m/s|
|Max.closing Speed:||0.5m/s||Door Weight:||120KG ( Single Leaf )|
|Door Width:||700mm To 2000mm|
Electric Motors Auto Slide Door Opener Soft Start And Close
Function and Characteristic
1. Install easy and fast .
2. Through operator box ,operating mode (auto,half-open , permanent open ,exit,night ) and parameter ( speed , delay close , close force , open width...) can be tuned .
3. Connectivity : beam sensor , key -switch , remote control , coded access controller , can interface to STD420 and STD420 system can drive alarm and interface to another control system .
Opening width: 700-2000 mm(single-leaf)
Max.leaf weight: 120kg(single-leaf)
Max.opening speed: 0.7m/s
Max.closing speed: 0.5m/s
Full-featured , easy to use automatic sliding door technology - reflect the perfect combination of the safety
and accuracy .
STD420 control system is very intelligent : it can be auto-adjust drive force by leaf weight to make leaf run stably . speedy and smoothly ,specially fit for heavy transit entrance such as bank , hospital ,opera house and so on .
It is special double track can avoid leaf degress . The battery( within standard part ) can open the door even on power failure .
The operator box can tune mode and preferences . STD420 can expand to interface with many kind of sensor and control device .
Standard accessories a set system of STD420 Automatic sliding door drive
1. Center computer Control 1 Unit
2. Power Module 140W transformer( include battery) 1 Unit
3. SLM420 Motor & Gear & Encoder & Wheels 1 Unit
4. STD420 Aluminium Rail 4.2 meter
5. Synchronous Belts(wired) 5 meter
6. Deflect Pulley 1 Unit
7. T-type Aluminium Roller Carrige 4 pieces
8. 12mm Screw 4 pieces
9. Lift 4 pieces
10. Radar sensor 2 pieces
11. Stop Block 2 pieces
12. Earth Connect Parts 1 piece
13. Cable 1 piece
Product picture :